Q: ADSL set up using pots filter
Posted by - NA - on 12 Dec 2008 11:07 AM

A: ADSL set up instruction using a pots filter 

  1. Fix the pots filter on the wall. You will find 3 sockets on the pots filter (Line, ATU MODEM and Phone). Connect the ADSL phone line to the Line socket.

  2. Then connect the ATU-R Modem Socket to the ADSL socket on the modem.

  3. Connect your phone directly to the Phone socket on the pots filter.

  4. Use the Ethernet cable and connect your computer to the modem.

  5. Plug the power adapter into the ADSL modem, then plug it into an available power outlet.

  6. Turn the modem on.

  7. Power, Ethernet and DSL lights have to be on (green color after 1 minute) on the modem.

  8. Setup your computer. To setup your computer please follow the instructions in this web page: Also to setup your router you should use the guidebook form the router manufacture.

(175 vote(s))
Not helpful

Comments (0)
Post a new comment
Full Name:
CAPTCHA Verification 
Please enter the text you see in the image into the textbox below (we use this to prevent automated submissions).